##
## httpd.conf -- Apache HTTP server configuration file
##
### Section 1: Global Environment
ServerType standalone 
ServerRoot "/etc/httpd"
LockFile /var/lock/httpd.lock
PidFile /var/run/httpd.pid
ScoreBoardFile /var/run/httpd.scoreboard
Timeout 300
KeepAlive On
MaxKeepAliveRequests 100
KeepAliveTimeout 15
MinSpareServers 3
MaxSpareServers 10
StartServers 4
MaxClients 80
MaxRequestsPerChild 100
Listen 80
#
#JkMount /*.jsp ajp13
#JkMount /servlet/* ajp13
#
#BindAddress *

#
# Dynamic Shared Object (DSO) Support
#
#LoadModule mmap_static_module modules/mod_mmap_static.so
LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule env_module         modules/mod_env.so
LoadModule config_log_module  modules/mod_log_config.so
LoadModule agent_log_module   modules/mod_log_agent.so
LoadModule referer_log_module modules/mod_log_referer.so
#LoadModule mime_magic_module  modules/mod_mime_magic.so
LoadModule mime_module        modules/mod_mime.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule status_module      modules/mod_status.so
LoadModule info_module        modules/mod_info.so
LoadModule includes_module    modules/mod_include.so
LoadModule autoindex_module   modules/mod_autoindex.so
LoadModule dir_module         modules/mod_dir.so
LoadModule cgi_module         modules/mod_cgi.so
LoadModule asis_module        modules/mod_asis.so
LoadModule imap_module        modules/mod_imap.so
LoadModule action_module      modules/mod_actions.so
#LoadModule speling_module     modules/mod_speling.so
LoadModule userdir_module     modules/mod_userdir.so
LoadModule alias_module       modules/mod_alias.so
LoadModule rewrite_module     modules/mod_rewrite.so
LoadModule access_module      modules/mod_access.so
LoadModule auth_module        modules/mod_auth.so
LoadModule anon_auth_module   modules/mod_auth_anon.so
LoadModule db_auth_module     modules/mod_auth_db.so
LoadModule dbm_auth_module    modules/mod_auth_dbm.so
#LoadModule auth_ldap_module   modules/mod_auth_ldap.so
#LoadModule digest_module      modules/mod_digest.so
#LoadModule proxy_module       modules/libproxy.so
#LoadModule cern_meta_module   modules/mod_cern_meta.so
LoadModule expires_module     modules/mod_expires.so
LoadModule headers_module     modules/mod_headers.so
#LoadModule usertrack_module   modules/mod_usertrack.so
#LoadModule example_module     modules/mod_example.so
#LoadModule unique_id_module   modules/mod_unique_id.so
LoadModule setenvif_module    modules/mod_setenvif.so
#LoadModule bandwidth_module   modules/mod_bandwidth.so
#LoadModule put_module	       modules/mod_put.so
#LoadModule throttle_module    modules/mod_throttle.so
#LoadModule define_module      modules/mod_define.so
#
# Webapp module for tomcat
LoadModule webapp_module modules/mod_webapp.so
AddModule mod_webapp.c
#
# Load mod_jk
LoadModule jk_module modules/mod_jk.so
AddModule mod_jk.c
#
# Configure mod_jk
JkWorkersFile /usr/local/jakarta/jakarta-tomcat-4.0/dist/conf/workers.properties
JkLogFile /var/log/httpd/mod_jk.log
JkLogLevel info

# Load support for php 4, does not work
#AddModule mod_php4.c

#
<IfDefine HAVE_PERL>
LoadModule perl_module        modules/libperl.so
</IfDefine>
<IfDefine HAVE_PHP>
LoadModule php_module         modules/mod_php.so
</IfDefine>
<IfDefine HAVE_PHP3>
LoadModule php3_module        modules/libphp3.so
</IfDefine>
<IfDefine HAVE_PHP4>
LoadModule php4_module        modules/libphp4.so
</IfDefine>
<IfDefine HAVE_DAV>
LoadModule dav_module         modules/libdav.so
</IfDefine>
<IfDefine HAVE_ROAMING>
LoadModule roaming_module     modules/mod_roaming.so
</IfDefine>
<IfDefine HAVE_SSL>
LoadModule ssl_module         modules/libssl.so
</IfDefine>

#  Reconstruction of the complete module list from all available modules
#  (static and shared ones) to achieve correct module execution order.
#  [WHENEVER YOU CHANGE THE LOADMODULE SECTION ABOVE UPDATE THIS, TOO]
#AddModule mod_mmap_static.c
#AddModule mod_mime_magic.c
#AddModule mod_speling.c
#AddModule mod_digest.c
#AddModule mod_proxy.c
#AddModule mod_cern_meta.c
#AddModule mod_usertrack.c
#AddModule mod_example.c
#AddModule mod_unique_id.c
#AddModule mod_bandwidth.c
#AddModule mod_put.c
AddModule mod_cgi.c
<IfDefine HAVE_PERL>
</IfDefine>
<IfDefine HAVE_PHP>
</IfDefine>
<IfDefine HAVE_PHP3>
</IfDefine>
<IfDefine HAVE_PHP4>
</IfDefine>
<IfDefine HAVE_DAV>
</IfDefine>
<IfDefine HAVE_ROAMING>
</IfDefine>
<IfDefine HAVE_SSL>
</IfDefine>

#
# ExtendedStatus: controls whether Apache will generate "full" status
# information (ExtendedStatus On) or just basic information (ExtendedStatus
# Off) when the "server-status" handler is called. The default is Off.
#
ExtendedStatus On

### Section 2: 'Main' server configuration
#
Port 80
User apache
Group apache
ServerAdmin webmaster@ing-steen.se
ServerName www.ing-steen.se
DocumentRoot /home/httpd/html
#
# Tomcat
JkMount /*.jsp ajp13
JkMount /servlet/* ajp13
# Block idiots
#
# Shutdown CodeRed
#RewriteEngine on
#RewriteCond %{REQUEST_URI} default.ida [OR]
#RewriteCond %{REQUEST_URI} cmd.exe [OR]
#RewriteCond %{REQUEST_URI} root.exe
#RewriteLogLevel 1
#RewriteLog |/usr/local/bin/strikeback.sh
Include /etc/httpd/conf/rewrite.conf
#
#ScriptLog /var/log/httpd/cgi-debug
# Per directory configuration
# Options may  be: "None", "All", or any combination of "Indexes",
# "Includes", "FollowSymLinks", "ExecCGI", or "MultiViews".
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
#
# AllowOverride controls which options the .htaccess files in directories can
# override. Can also be "All", or any combination of "Options", "FileInfo", 
# "AuthConfig", and "Limit"

<Directory />
    Options FollowSymLinks Includes ExecCGI
    AllowOverride None
</Directory>

#
<Directory "/home/httpd/html">
    Options Includes All ExecCGI
    AllowOverride None
    Order allow,deny
    Allow from all
</Directory>

<Directory "/home/httpd/html/support/*">
    Options Includes All ExecCGI
    AllowOverride All 
    Order allow,deny
    Allow from all
</Directory>

#
# UserDir: The name of the directory which is appended onto a user's home
# directory if a ~user request is received.
#
# The path to the end user account 'public_html' directory must be
# accessible to the webserver userid.  This usually means that ~userid
# must have permissions of 711, ~userid/public_html must have permissions
# of 755, and documents contained therein must be world-readable.
# Otherwise, the client will only receive a "403 Forbidden" message.
#
# See also: http://httpd.apache.org/docs/misc/FAQ.html#forbidden
#
#UserDir public_html
UserDir /home/httpd/html/users

#
# Control access to UserDir directories.  The following is an example
# for a site where these directories are restricted to read-only.
#
<Directory /home/httpd/html/users/*>
    AllowOverride FileInfo AuthConfig Limit
    Options MultiViews Indexes SymLinksIfOwnerMatch ExecCGI Includes 
    <Limit GET POST OPTIONS PROPFIND>
        Order allow,deny
        Allow from all
    </Limit>
    <Limit PUT DELETE PATCH PROPPATCH MKCOL COPY MOVE LOCK UNLOCK>
        Order deny,allow
        Deny from all
    </Limit>
</Directory>

<Directory /home/httpd/html/tjanster/hotell/*>
    AllowOverride FileInfo AuthConfig Limit
    Options MultiViews Indexes SymLinksIfOwnerMatch ExecCGI Includes
    <Limit GET POST OPTIONS PROPFIND>
        Order allow,deny
        Allow from all
    </Limit>
    <Limit PUT DELETE PATCH PROPPATCH MKCOL COPY MOVE LOCK UNLOCK>
        Order deny,allow
        Deny from all
    </Limit>
</Directory> 

#
# DirectoryIndex: Name of the file or files to use as a pre-written HTML
# directory index.  Separate multiple entries with spaces.
#
DirectoryIndex index.html index.htm index.shtml index.php index.php4 index.php3 index.cgi

#
# AccessFileName: The name of the file to look for in each directory
# for access control information.
#
AccessFileName .htaccess

#
# The following lines prevent .htaccess files from being viewed by
# Web clients.  Since .htaccess files often contain authorization
# information, access is disallowed for security reasons.  Comment
# these lines out if you want Web visitors to see the contents of
# .htaccess files.  If you change the AccessFileName directive above,
# be sure to make the corresponding changes here.
#
# Also, folks tend to use names such as .htpasswd for password
# files, so this will protect those as well.
#
<Files ~ "^\.ht">
    Order allow,deny
    Deny from all
</Files>

#
# CacheNegotiatedDocs: By default, Apache sends "Pragma: no-cache" with each
# document that was negotiated on the basis of content. This asks proxy
# servers not to cache the document. Uncommenting the following line disables
# this behavior, and proxies will be allowed to cache the documents.
#
#CacheNegotiatedDocs

#
# UseCanonicalName:  (new for 1.3)  With this setting turned on, whenever
# Apache needs to construct a self-referencing URL (a URL that refers back
# to the server the response is coming from) it will use ServerName and
# Port to form a "canonical" name.  With this setting off, Apache will
# use the hostname:port that the client supplied, when possible.  This
# also affects SERVER_NAME and SERVER_PORT in CGI scripts.
#
UseCanonicalName on

#
# TypesConfig describes where the mime.types file (or equivalent) is
# to be found.
#
TypesConfig /etc/mime.types

#
# DefaultType is the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value.  If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
#
DefaultType text/plain

#
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type.  The MIMEMagicFile
# directive tells the module where the hint definitions are located.
# mod_mime_magic is not part of the default server (you have to add
# it yourself with a LoadModule [see the DSO paragraph in the 'Global
# Environment' section], or recompile the server and include mod_mime_magic
# as part of the configuration), so it's enclosed in an <IfModule> container.
# This means that the MIMEMagicFile directive will only be processed if the
# module is part of the server.
#
<IfModule mod_mime_magic.c>
    MIMEMagicFile conf/magic
</IfModule>

#
# HostnameLookups: Log the names of clients or just their IP addresses
# e.g., www.apache.org (on) or 204.62.129.132 (off).
# The default is off because it'd be overall better for the net if people
# had to knowingly turn this feature on, since enabling it means that
# each client request will result in AT LEAST one lookup request to the
# nameserver.
#
HostNameLookups on

#
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here.  If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
#
ErrorLog /var/log/httpd/error_log

#
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
#
LogLevel warn

#
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
#
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent

#
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here.  Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
#
# CustomLog /var/log/httpd/access_log common
CustomLog /var/log/httpd/access_log combined

#
# If you would like to have agent and referer logfiles, uncomment the
# following directives.
#
#CustomLog /var/log/httpd/referer_log referer
#CustomLog /var/log/httpd/agent_log agent

#
# If you prefer a single logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#
#CustomLog /var/log/httpd/access_log combined

#
# Optionally add a line containing the server version and virtual host
# name to server-generated pages (error documents, FTP directory listings,
# mod_status and mod_info output etc., but not CGI generated documents).
# Set to "EMail" to also include a mailto: link to the ServerAdmin.
# Set to one of:  On | Off | EMail
#
ServerSignature On

#
# Aliases: Add here as many aliases as you need (with no limit). The format is 
# Alias fakename realname
#
# Note that if you include a trailing / on fakename then the server will
# require it to be present in the URL.  So "/icons" isn't aliased in this
# example, only "/icons/"..
#
#Alias /icons/ "/var/www/icons/"
Alias /icons/ "/home/httpd/icons/"

<Directory "/home/httpd/icons">
    Options Indexes MultiViews
    AllowOverride None
    Order allow,deny
    Allow from all
</Directory>

<Directory "/home/httpd/html/nyheter">
    Options Indexes MultiViews Includes ExecCGI
    AllowOverride None
    Order allow,deny
    Allow from all
</Directory>

Alias /share/ "/home/ftp/pub/"
<Directory "/home/ftp/pub">
    Options Indexes MultiViews FollowSymLinks Includes ExecCGI
    IndexIgnore mera indexcount.pl indexCnt aquota.group aquota.user quota.group quota.user
    AllowOverride None
    Order allow,deny
    Allow from all
</Directory>

Alias /student/ "/home/ftp/pub/text/school/"
<Directory "/home/ftp/pub/text/school">
    Options Indexes MultiViews FollowSymLinks Includes ExecCGI
    IndexIgnore mera indexcount.pl indexCnt aquota.group aquota.user quota.group quota.user
    AllowOverride None
    Order allow,deny
    Allow from all
</Directory>

Alias /paula/ "/home/httpd/html/users/paula/"
<Directory "/home/httpd/html/users/paula">
    Options Indexes MultiViews FollowSymLinks Includes ExecCGI
#    IndexIgnore mera indexcount.pl indexCnt aquota.group aquota.user quota.group
    AllowOverride None
    Order allow,deny
    Allow from all
</Directory>

Alias /radiocast/ "/home/httpd/html/support/radiocast/"
<Directory "/home/httpd/html/support/radiocast">
    Options Indexes MultiViews Includes ExecCGI
#    IndexIgnore mera indexcount.pl indexCnt aquota.group aquota.user quota.group
    AllowOverride None
    Order allow,deny
    Allow from all
</Directory>

Alias /mera/ "/home/ftp/pub/mera/"
<Directory "/home/ftp/pub/mera">
    AuthDBUserFile /etc/httpd/conf/http.password
    AuthDBGroupFile /etc/httpd/conf/http.groups
    AuthType Basic
    AuthName "Users own, by invention Only. Please go away."
    AllowOverride None
    Require valid-user
    Options Indexes MultiViews Includes ExecCGI FollowSymLinks
    <Limit GET POST HEAD>
	Order deny,allow
	deny from all
	Allow from all
    </Limit>
</Directory>

Alias /forinita/ "/home/httpd/html/users/marsel/forinita/"
<Directory "/home/httpd/html/users/marsel/forinita">
    AuthDBUserFile /etc/httpd/conf/forinita.password
    AuthDBGroupFile /etc/httpd/conf/forinita.groups
    AuthType Basic
    AuthName "Forinita employees only, please go away."
    AllowOverride None
    Require valid-user
    Options Indexes MultiViews Includes ExecCGI FollowSymLinks
    <Limit GET POST HEAD>
        Order deny,allow
        deny from all
        Allow from all
    </Limit>
</Directory>

<Directory "/home/httpd/html/users/userlogin">
    AuthDBUserFile /etc/httpd/conf/userlogin.password
    AuthDBGroupFile /etc/httpd/conf/forinita.groups
    AuthType Basic
    AuthName "Users private logins only, please go away."
    AllowOverride None
    Require valid-user
    Options Indexes MultiViews Includes ExecCGI FollowSymLinks
    <Limit GET POST HEAD>
        Order deny,allow
        deny from all
        Allow from all
    </Limit>
</Directory>
#
# Vocal configuration
#
Alias /vocal/ "/usr/local/vocal/html/"
<Directory "/usr/local/vocal/html">
	AllowOverride None
	Order allow,deny
	Allow from all
</Directory>
#
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the realname directory are treated as applications and
# run by the server when requested rather than as documents sent to the client.
# The same rules about trailing "/" apply to ScriptAlias directives as to
# Alias.
#
ScriptAlias /cgi-bin/ /home/httpd/cgi-bin/

#
# Tarantella setup
#
ScriptAlias /tarantella/cgi-bin /opt/tarantella/var/docroot/cgi-bin
Alias /tarantella /opt/tarantella/var/docroot

#
# "/var/www/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
#
<Directory "/home/httpd/cgi-bin">
    AllowOverride None
    Options ExecCGI
    Order allow,deny
    Allow from all
</Directory>

#
# Vocal setup
#
ScriptAlias /vocalconf "/usr/local/vocal/cgi-bin"
<Directory "/usr/local/vocal/cgi-bin">
	AllowOverride None
	Options ExecCGI
	Order allow,deny
	Allow from all
</Directory>
#
# Redirect allows you to tell clients about documents which used to exist in
# your server's namespace, but do not anymore. This allows you to tell the
# clients where to look for the relocated document.
# Format: Redirect old-URI new-URL
#

#
# Directives controlling the display of server-generated directory listings.
#

#
# FancyIndexing: whether you want fancy directory indexing or standard
#
IndexOptions FancyIndexing

#
# AddIcon* directives tell the server which icon to show for different
# files or filename extensions.  These are only displayed for
# FancyIndexed directories.
#
AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip

AddIconByType (TXT,/icons/text.gif) text/*
AddIconByType (IMG,/icons/image2.gif) image/*
AddIconByType (SND,/icons/sound2.gif) audio/*
AddIconByType (VID,/icons/movie.gif) video/*

AddIcon /icons/binary.gif .bin .exe
AddIcon /icons/binhex.gif .hqx
AddIcon /icons/tar.gif .tar
AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
AddIcon /icons/a.gif .ps .ai .eps
AddIcon /icons/layout.gif .html .shtml .htm .pdf
AddIcon /icons/text.gif .txt
AddIcon /icons/c.gif .c
AddIcon /icons/p.gif .pl .py
AddIcon /icons/f.gif .for
AddIcon /icons/dvi.gif .dvi
AddIcon /icons/uuencoded.gif .uu
AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
AddIcon /icons/tex.gif .tex
AddIcon /icons/bomb.gif core

AddIcon /icons/back.gif ..
AddIcon /icons/hand.right.gif README
AddIcon /icons/folder.gif ^^DIRECTORY^^
AddIcon /icons/blank.gif ^^BLANKICON^^

#
# DefaultIcon: which icon to show for files which do not have an icon
# explicitly set.
#
DefaultIcon /icons/unknown.gif

#
# AddDescription: allows you to place a short description after a file in
# server-generated indexes.  These are only displayed for FancyIndexed
# directories.
# Format: AddDescription "description" filename
#
AddDescription "GZIP compressed document" .gz
AddDescription "tar archive" .tar
AddDescription "GZIP compressed tar archive" .tgz
AddDescription "MP3 music stream" .mp3

#
# ReadmeName: the name of the README file the server will look for by
# default, and append to directory listings.
#
# HeaderName: the name of a file which should be prepended to
# directory indexes. 
#
# The server will first look for name.html and include it if found.
# If name.html doesn't exist, the server will then look for name.txt
# and include it as plaintext if found.
#
ReadmeName README.html
HeaderName HEADER.html

#
# IndexIgnore: a set of filenames which directory indexing should ignore
# and not include in the listing.  Shell-style wildcarding is permitted.
#
IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t

#
# AddEncoding: allows you to have certain browsers (Mosaic/X 2.1+) uncompress
# information on the fly. Note: Not all browsers support this.
# Despite the name similarity, the following Add* directives have nothing
# to do with the FancyIndexing customization directives above.
#
AddEncoding x-compress Z
AddEncoding x-gzip gz tgz

#
# AddLanguage: allows you to specify the language of a document. You can
# then use content negotiation to give a browser a file in a language
# it can understand.  Note that the suffix does not have to be the same
# as the language keyword --- those with documents in Polish (whose
# net-standard language code is pl) may wish to use "AddLanguage pl .po" 
# to avoid the ambiguity with the common suffix for perl scripts.
#
AddLanguage en .en
AddLanguage fr .fr
AddLanguage de .de
AddLanguage da .da
AddLanguage el .el
AddLanguage it .it

#
# LanguagePriority: allows you to give precedence to some languages
# in case of a tie during content negotiation.
# Just list the languages in decreasing order of preference.
#
LanguagePriority en fr de se

#
# AddType: allows you to tweak mime.types without actually editing it, or to
# make certain files to be certain types.
#
# The following is for PHP4 (conficts with PHP/FI, below):
<IfModule mod_php4.c>
  AddType application/x-httpd-php .php4 .php3 .phtml .php
  AddType application/x-httpd-php-source .phps
</IfModule>

# The following is for PHP3:
<IfModule mod_php3.c>
  AddType application/x-httpd-php3 .php3
  AddType application/x-httpd-php3-source .phps
</IfModule>

# The following is for PHP/FI (PHP2):
<IfModule mod_php.c>
  AddType application/x-httpd-php .phtml
</IfModule>

AddType application/x-tar .tgz

AddType audio/mpeg mp3 MP3
AddType audio/playlist m3u M3U
AddType audio/x-scpls pls PLS
AddType application/x-ogg ogg OGG
AddType audio/wav wav WAV
AddType application/x-x509-ca-cert cacert
# AddHandler: allows you to map certain file extensions to "handlers",
# actions unrelated to filetype. These can be either built into the server
# or added with the Action command (see below)
#
# If you want to use server side includes, or CGI outside
# ScriptAliased directories, uncomment the following lines.
#
# To use CGI scripts:
#
AddHandler cgi-script .cgi pl

#
# To use server-parsed HTML files
# .shtml
AddHandler server-parsed .shtml
AddHandler server-parsed .html
AddHandler server-parsed .htm
AddType text/html .shtml
AddType text/html .htm

#
# Uncomment the following line to enable Apache's send-asis HTTP file
# feature
#
#AddHandler send-as-is asis

#
# If you wish to use server-parsed imagemap files, use
#
AddHandler imap-file map

#
# To enable type maps, you might want to use
#
#AddHandler type-map var

#
# Action: lets you define media types that will execute a script whenever
# a matching file is called. This eliminates the need for repeated URL
# pathnames for oft-used CGI file processors.
# Format: Action media/type /cgi-script/location
# Format: Action handler-name /cgi-script/location
#

#
# MetaDir: specifies the name of the directory in which Apache can find
# meta information files. These files contain additional HTTP headers
# to include when sending the document
#
#MetaDir .web

#
# MetaSuffix: specifies the file name suffix for the file containing the
# meta information.
#
#MetaSuffix .meta

#
# Customizable error response (Apache style)
#  these come in three flavors
#
#    1) plain text
#ErrorDocument 500 "The server made a boo boo.
#  n.b.  the (") marks it as text, it does not get output
#
#    2) local redirects
#ErrorDocument 404 /missing.html
#  to redirect to local URL /missing.html
#ErrorDocument 404 /cgi-bin/missing_handler.pl
#  N.B.: You can redirect to a script or a document using server-side-includes.
#
#    3) external redirects
#ErrorDocument 402 http://some.other_server.com/subscription_info.html
#  N.B.: Many of the environment variables associated with the original
#  request will *not* be available to such a script.

#
# The following directives modify normal HTTP response behavior.
# The first directive disables keepalive for Netscape 2.x and browsers that
# spoof it. There are known problems with these browser implementations.
# The second directive is for Microsoft Internet Explorer 4.0b2
# which has a broken HTTP/1.1 implementation and does not properly
# support keepalive when it is used on 301 or 302 (redirect) responses.
#
BrowserMatch "Mozilla/2" nokeepalive
BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0

#
# The following directive disables HTTP/1.1 responses to browsers which
# are in violation of the HTTP/1.0 spec by not being able to grok a
# basic 1.1 response.
#
BrowserMatch "RealPlayer 4\.0" force-response-1.0
BrowserMatch "Java/1\.0" force-response-1.0
BrowserMatch "JDK/1\.0" force-response-1.0


# If the perl module is installed, this will be enabled.
<IfModule mod_perl.c>
  Alias /perl/ /home/httpd/perl/
  <Location /perl>
    SetHandler perl-script
    PerlHandler Apache::Registry
    Options +ExecCGI
  </Location>
</IfModule>

<Location /perl-status>
SetHandler perl-script
#PerlHandler Apache::Status
</Location>

# Allow access to local system documentation from localhost
Alias /doc/ /usr/share/doc/
<Location /doc>
  order deny,allow
  deny from all
#  allow from all
  allow from .ing-steen.se localhost .localdomain
  Options Indexes FollowSymLinks
</Location>

# MP3 music
<Location /support/radio>
    AuthDBUserFile /etc/httpd/conf/radio.password
    AuthDBGroupFile /etc/httpd/conf/forinita.groups
    AuthType Basic
    AuthName "Only registered members, please go away."
    AllowOverride None
    Require valid-user
    Options Indexes MultiViews Includes ExecCGI FollowSymLinks
    <Limit GET POST HEAD>
        Order deny,allow
        deny from all
        Allow from all
    </Limit>
  SetHandler perl-script
  PerlHandler   Apache::MP3::Sorted
  PerlSetVar    SortFields      Album,Title,-Duration
  PerlSetVar    Fields          Title,Artist,Album,Duration,Bitrate,Samplerate
  PerlSetVar    AllowDownload   no
#  Order allow,deny
#  Allow from All
#  Options Includes All ExecCGI
</Location>

# MP3 music
<Directory /home/ftp/pub/music/ogg>
    AuthDBUserFile /etc/httpd/conf/radio.password
    AuthDBGroupFile /etc/httpd/conf/forinita.groups
    AuthType Basic
    AuthName "Registered users only, please go away."
    AllowOverride None
    Require valid-user
    Options Indexes MultiViews Includes ExecCGI FollowSymLinks
    <Limit GET POST HEAD>
        Order deny,allow
        deny from all
        Allow from all
    </Limit>
  SetHandler perl-script
  PerlHandler   Apache::MP3::Sorted
  PerlSetVar    SortFields      Album,Title,-Duration
  PerlSetVar    Fields          Title,Artist,Album,Duration,Bitrate,Samplerate
  PerlSetVar    AllowDownload   no
#  Options FollowSymlinks
#  Order allow,deny
#  Allow from All
#  Options Includes All ExecCGI
</Directory>

#
# Allow http put (such as Netscape Gold's publish feature)
# Use htpasswd to generate /etc/httpd/conf/passwd.
# You must unremark these two lines at the top of this file as well:
#LoadModule put_module		modules/mod_put.so
#AddModule mod_put.c
#
#Alias /upload /tmp
#<Location /upload>
#    EnablePut On
#    AuthType Basic
#    AuthName Temporary
#    AuthUserFile /etc/httpd/conf/passwd
#    EnableDelete Off
#    umask 007
#    <Limit PUT>
#	require valid-user
#    </Limit>
#</Location>

#
# Allow server status reports, with the URL of http://servername/server-status
# Change the ".your_domain.com" to match your domain to enable.
#
<Location /server-status>
    SetHandler server-status
    Order deny,allow
    Deny from all
    Allow from .ing-steen.se
</Location>

#
# Allow remote server configuration reports, with the URL of
#  http://servername/server-info (requires that mod_info.c be loaded).
# Change the ".your_domain.com" to match your domain to enable.
#
<Location /server-info>
    SetHandler server-info
    Order deny,allow
    Deny from all
    Allow from .ing-steen.se
</Location>

# Allow access to local system documentation from localhost
Alias /doc/ /usr/share/doc/
<Location /doc>
  order deny,allow
  deny from all
#  allow from all
  allow from .ing-steen.se localhost .localdomain
  Options Indexes FollowSymLinks
</Location>

#
# There have been reports of people trying to abuse an old bug from pre-1.1
# days.  This bug involved a CGI script distributed as a part of Apache.
# By uncommenting these lines you can redirect these attacks to a logging 
# script on phf.apache.org.  Or, you can record them yourself, using the script
# support/phf_abuse_log.cgi.
#
#<Location /cgi-bin/phf*>
#    Deny from all
#    ErrorDocument 403 http://phf.apache.org/phf_abuse_log.cgi
#</Location>

#
# Proxy Server directives. Uncomment the following lines to
# enable the proxy server:
#
#<IfModule mod_proxy.c>
#ProxyRequests On
#
#<Directory proxy:*>
#    Order deny,allow
#    Deny from all
#    Allow from .your_domain.com
#</Directory>

#
# Enable/disable the handling of HTTP/1.1 "Via:" headers.
# ("Full" adds the server version; "Block" removes all outgoing Via: headers)
# Set to one of: Off | On | Full | Block
#
#ProxyVia On

#
# To enable the cache as well, edit and uncomment the following lines:
# (no cacheing without CacheRoot)
#
#CacheRoot "/var/cache/httpd"
#CacheSize 5
#CacheGcInterval 4
#CacheMaxExpire 24
#CacheLastModifiedFactor 0.1
#CacheDefaultExpire 1
#NoCache a_domain.com another_domain.edu joes.garage_sale.com

#</IfModule>
# End of proxy directives.

### Section 3: Virtual Hosts
#
# VirtualHost: If you want to maintain multiple domains/hostnames on your
# machine you can setup VirtualHost containers for them.
# Please see the documentation at <URL:http://www.apache.org/docs/vhosts/>
# for further details before you try to setup virtual hosts.
# You may use the command line option '-S' to verify your virtual host
# configuration.

#
# If you want to use name-based virtual hosts you need to define at
# least one IP address (and port number) for them.
#
#NameVirtualHost 12.34.56.78:80
#NameVirtualHost 12.34.56.78

#
# VirtualHost example:
# Almost any Apache directive may go into a VirtualHost container.
#
#<VirtualHost ip.address.of.host.some_domain.com>
#    ServerAdmin webmaster@host.some_domain.com
#    DocumentRoot /www/docs/host.some_domain.com
#    ServerName host.some_domain.com
#    ErrorLog logs/host.some_domain.com-error_log
#    CustomLog logs/host.some_domain.com-access_log common
#</VirtualHost>
NameVirtualHost 80.84.34.52
<VirtualHost 80.84.34.52>
    ServerAdmin paula.steen@ing-steen.se
    DocumentRoot /home/httpd/html/users/paula
    ServerName paula.ing-steen.se
    ErrorLog logs/paula-error_log
    CustomLog logs/paula-access_log common
</VirtualHost>
<VirtualHost 80.84.34.52>
    ServerAdmin m8114@ing-steen.se
    DocumentRoot /home/httpd/html/users/m8114
    ServerName marcel.ing-steen.se
    ErrorLog logs/marcel-error_log
    CustomLog logs/marcel-access_log common
</VirtualHost>
<VirtualHost 80.84.34.52>
    ServerAdmin radio@ing-steen.se
    DocumentRoot /home/httpd/html/support/radiocast
    ServerName radio.ing-steen.se
    ErrorLog logs/radio-error_log
    CustomLog logs/radio-access_log common
</VirtualHost>
# Janeways webb-server
Include /etc/httpd/conf/janeway/vs_janeway.conf
# The FTP server
<VirtualHost 80.84.34.52>
    ServerAdmin root@ing-steen.se
    DocumentRoot /home/ftp/pub
    ServerName ftp.ing-steen.se
    ErrorLog logs/ftp-error_log
    CustomLog logs/ftp-access_log common
</VirtualHost>
<VirtualHost 80.84.34.52>
    ServerAdmin ulf@ing-steen.se
    DocumentRoot /home/httpd/html/users/ulf
    ServerName ulf.ing-steen.se
    ErrorLog logs/ulf-error_log
    CustomLog logs/ulf-access_log common
</VirtualHost>
<VirtualHost 80.84.34.52>
    ServerAdmin forinita@ing-steen.se                                        
    DocumentRoot /home/httpd/html/users/marsel/forinita                      
    ServerName forinita.ing-steen.se                                        
    ErrorLog logs/forinita-error_log                                         
    CustomLog logs/forinita-access_log common                               
</VirtualHost>
<VirtualHost 80.84.34.52>
    ServerAdmin echstedt@ing-steen.se
    DocumentRoot /home/httpd/html/users/echstedt
    ServerName echstedt.ing-steen.se
    ErrorLog logs/echstedt-error_log
    CustomLog logs/echstedt-access_log common
</VirtualHost>
<VirtualHost 80.84.34.52>
    ServerAdmin kisse@ing-steen.se
    DocumentRoot /home/httpd/html/users/kisse
    ServerName kisse.ing-steen.se
    ErrorLog logs/kisse-error_log
    CustomLog logs/kisse-access_log common
</VirtualHost>
<VirtualHost 80.84.34.52>
    ServerAdmin kalf@ing-steen.se
    DocumentRoot /home/httpd/html/users/kalf
    ServerName kalf.ing-steen.se
    ErrorLog logs/kalf-error_log
    CustomLog logs/kalf-access_log common
</VirtualHost>
<VirtualHost 80.84.34.52>                                                       
    ServerAdmin root@ing-steen.se                                               
    DocumentRoot /home/ftp/pub/text/school
    ServerName student.ing-steen.se
    ErrorLog logs/student-error_log
    CustomLog logs/student-access_log common
</VirtualHost>
<VirtualHost 80.84.34.52>
    ServerAdmin root@ing-steen.se
    DocumentRoot /home/httpd/html/blocked
    ServerName login.ing-steen.se
    ErrorLog logs/login-error_log
    CustomLog logs/login-access_log common
</VirtualHost>
#<VirtualHost _default_:*>
#</VirtualHost>

<IfDefine HAVE_SSL>
##
## SSL Virtual Host Context
##

#  Apache will only listen on port 80 by default.  Defining the virtual server
#  (below) won't make it automatically listen on the virtual server's port.
# Had to shut down this due to WORM problem
#Listen 443

#   SSL Session Cache:
#   The cache speeds up processing of multiple parallel requests from
#   the same client.
SSLSessionCache shm:/var/cache/ssl_gcache_data(524288)

<VirtualHost _default_:443>

#  General setup for the virtual host
DocumentRoot "/home/httpd/html/login"

#   SSL Engine Switch:
#   Enable/Disable SSL for this virtual host.
# Had to shut down this due to WORM problem 
SSLEngine off

#   SSL Cipher Suite:
#   List the ciphers that the client is permitted to negotiate.
#   See the mod_ssl documentation for a complete list.
# Had to shut down this due to WORM problem 
#SSLCipherSuite ALL:!ADH:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP:+eNULL
SSLCipherSuite ALL:!ADH:RC4+RSA:+HIGH:+MEDIUM:+LOW:!SSLv2:+EXP:+eNULL
#   Server Certificate:
#   Point SSLCertificateFile at a PEM encoded certificate.  If
#   the certificate is encrypted, then you will be prompted for a
#   pass phrase.  Note that a kill -HUP will prompt again. A test
#   certificate can be generated with `make certificate' under
#   built time. Keep in mind that if you've both a RSA and a DSA
#   certificate you can configure both in parallel (to also allow
#   the use of DSA ciphers, etc.)
SSLCertificateFile /usr/local/ssl/certs/sitecert.pem
#SSLCertificateFile /etc/httpd/conf/ssl.crt/server-dsa.crt

#   Server Private Key:
#   If the key is not combined with the certificate, use this
#   directive to point at the key file.  Keep in mind that if
#   you've both a RSA and a DSA private key you can configure
#   both in parallel (to also allow the use of DSA ciphers, etc.)
SSLCertificateKeyFile /usr/local/ssl/certs/sitekey.pem
#SSLCertificateKeyFile /etc/httpd/conf/ssl.key/server-dsa.key

#   Server Certificate Chain:
#   Point SSLCertificateChainFile at a file containing the
#   concatenation of PEM encoded CA certificates which form the
#   certificate chain for the server certificate. Alternatively
#   the referenced file can be the same as SSLCertificateFile
#   when the CA certificates are directly appended to the server
#   certificate for convinience.
#SSLCertificateChainFile /etc/httpd/conf/ssl.crt/ca.crt

#   Certificate Authority (CA):
#   Set the CA certificate verification path where to find CA
#   certificates for client authentication or alternatively one
#   huge file containing all of them (file must be PEM encoded)
#   Note: Inside SSLCACertificatePath you need hash symlinks
#         to point to the certificate files. Use the provided
#         Makefile to update the hash symlinks after changes.
SSLCACertificatePath /usr/local/ssl/certs/demoCA/private
SSLCACertificateFile /usr/local/ssl/certs/demoCA/private/CAcert.pem

#   Certificate Revocation Lists (CRL):
#   Set the CA revocation path where to find CA CRLs for client
#   authentication or alternatively one huge file containing all
#   of them (file must be PEM encoded)
#   Note: Inside SSLCARevocationPath you need hash symlinks
#         to point to the certificate files. Use the provided
#         Makefile to update the hash symlinks after changes.
#SSLCARevocationPath /etc/httpd/conf/ssl.crl
#SSLCARevocationFile /etc/httpd/conf/ssl.crl/ca-bundle.crl
#   Client Authentication (Type):
#   Client certificate verification type and depth.  Types are
#   none, optional, require and optional_no_ca.  Depth is a
#   number which specifies how deeply to verify the certificate
#   issuer chain before deciding the certificate is not valid.
#SSLVerifyClient require
#SSLVerifyDepth  10

#   Access Control:
#   With SSLRequire you can do per-directory access control based
#   on arbitrary complex boolean expressions containing server
#   variable checks and other lookup directives.  The syntax is a
#   mixture between C and Perl.  See the mod_ssl documentation
#   for more details.
<Location />
SSLRequire (    %{SSL_CIPHER} !~ m/^(EXP|NULL)-/ \
            and %{SSL_CLIENT_S_DN_O} eq "Snake Oil, Ltd." \
            and %{SSL_CLIENT_S_DN_OU} in {"Staff", "CA", "Dev"} \
            and %{TIME_WDAY} >= 1 and %{TIME_WDAY} <= 5 \
            and %{TIME_HOUR} >= 8 and %{TIME_HOUR} <= 20       ) \
           or %{REMOTE_ADDR} =~ m/^192\.76\.162\.[0-9]+$/
</Location>
#   SSL Engine Options:
#   Set various options for the SSL engine.
#   o FakeBasicAuth:
#     Translate the client X.509 into a Basic Authorisation.  This means that
#     the standard Auth/DBMAuth methods can be used for access control.  The
#     user name is the `one line' version of the client's X.509 certificate.
#     Note that no password is obtained from the user. Every entry in the user
#     file needs this password: `xxj31ZMTZzkVA'.
#   o ExportCertData:
#     This exports two additional environment variables: SSL_CLIENT_CERT and
#     SSL_SERVER_CERT. These contain the PEM-encoded certificates of the
#     server (always existing) and the client (only existing when client
#     authentication is used). This can be used to import the certificates
#     into CGI scripts.
#   o StdEnvVars:
#     This exports the standard SSL/TLS related `SSL_*' environment variables.
#     Per default this exportation is switched off for performance reasons,
#     because the extraction step is an expensive operation and is usually
#     useless for serving static content. So one usually enables the
#     exportation for CGI and SSI requests only.
#   o CompatEnvVars:
#     This exports obsolete environment variables for backward compatibility
#     to Apache-SSL 1.x, mod_ssl 2.0.x, Sioux 1.0 and Stronghold 2.x. Use this
#     to provide compatibility to existing CGI scripts.
#   o StrictRequire:
#     This denies access when "SSLRequireSSL" or "SSLRequire" applied even
#     under a "Satisfy any" situation, i.e. when it applies access is denied
#     and no other module can change it.
#   o OptRenegotiate:
#     This enables optimized SSL connection renegotiation handling when SSL
#     directives are used in per-directory context.
SSLOptions +FakeBasicAuth +ExportCertData +CompatEnvVars +StrictRequire
<Files ~ "\.(cgi|shtml)$">
    SSLOptions +StdEnvVars
</Files>
<Directory "/home/httpd/cgi-bin">
    SSLOptions +StdEnvVars
</Directory>

#   Notice: Most problems of broken clients are also related to the HTTP
#   keep-alive facility, so you usually additionally want to disable
#   keep-alive for those clients, too. Use variable "nokeepalive" for this.
SetEnvIf User-Agent ".*MSIE.*" nokeepalive ssl-unclean-shutdown

#   Per-Server Logging:
#   The home of a custom SSL log file. Use this when you want a
#   compact non-error SSL logfile on a virtual host basis.
CustomLog /var/log/httpd/ssl_request_log \
          "%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b"

</VirtualHost>

</IfDefine>
XBitHack full
ScriptLog /var/log/httpd/cgi
<Directory "/home/httpd/html/support/guestbook/book">
    Options Includes All ExecCGI
    AllowOverride None
    Order allow,deny
    Allow from all
</Directory>